Kia Cerato Koup Rio Soul Sorentlo & Sportage 3 button flip key rubber button pad

We see lots of these flip keys with the same old problem, holes in the rubber button pad. Once the pad tears away it is very difficult to lock or unlock your car. You don't have to replace your entire remote flip key just because there are holes in the button pad. Here we offer you a top quality replacement for your Kia 3 button remote flip key buttons.

As long as your remote control module still works, you can simply replace the pad and your key will look like new again. Please take great care when removing the old rubber pad from the shell as there is a plastic frame inside it that keeps it in place.

This shape flip-key was used with a bunch of Kia models including Cerato, Koup, Rio Soul Sorento & Sportage and was also used with some of the Hyundai models including the i20, i30, Elantra & Accent models.

If you come into our East Victoria Park shop we will be happy to cut the key, swap over your case and test your battery, while you wait. It is always best to have the car present when getting the key cut so it can be properly tested. 

WE CHARGE $20 TO SWAP OVER THE BUTTON PAD. THIS SERVICE IS ONLY AVAILABLE AT OUR EAST VICTORIA PARK SHOP IN PERTH.

PLEASE ALLOW APPROX 20-30 MINUTES FOR THIS SERVICE AND BRING THE CAR SO WE CAN TEST THE REMOTE IS FUNCTIONING CORRECTLY 

If you do not live close by you can of course order this key shell and take it to your local key cutting shop and have them cut the blade to match your existing key. Then you can swap the remote module and transponder chip into the new shell and you are up and running.

Your original Hyundai flip key button pad will be glued in place and we advise you to use a rubber contact glue on this pad also.

DO NOT UNDER ANY CIRCUMSTANCES USE SUPER GLUE ON THIS PAD

REF - MLHY02