Kia Sorento UM genuine 3 button smart proximity key remote 95440-C5100

Kia Sorento UM series genuine 95440-C5100 3 button genuine smart proximity remote key. Please check the part number or supply us with the VIN (Vehicle identification number) for your vehicle to ensure this is suitible.

Used with models from 2016 onward but please make sure to check the part number matches.

This table is intended as a guide only and so if you do not see your car in the list but you use a key that looks identical to this one, please email us details of your vehicle (YEAR - MAKE - MODEL - VIN) and a photo of the key and we will assist you to choose the correct replacement key for your vehicle.

Many of the newer Kia and Hyundai smart keys come with a sticker on the back which shows the part number. If this has been removed you can also find more information on the key on the inside of the back cover. To open the smart remote, slide out the emergency key blade by pressing the small silver button on the back of the smart remote.

Once the emergency key has been removed, hold the smart remote with the buttons facing upward and the open end facing you. You will see a small slot on the right side of the open end. Using a flat blade screwdriver, insert it in that slot and gently twist and the case will open.

Your old key may also still have the sticker on the back showing the part number - 95440-C5100

This smart key emergency blade is sold seperately. Cutting the key and programming to the vehicle NOT included in the price.

Please remove the emergency key from your existing remote and compare the key profile to those in the photos to esnure your key is the same profile. Press the small silver rectangular button on the back of the remote to release the emergency blade and just slide it out.

The standard emergency key which comes with the remote uses the JMA HY-19 or Silca HYN17R key profile as shown in the attached photos. The part number for this matching key blade is 81996-C5040.

The remote comes with a battery already fitted and the battery type is listed under "Compatible Items" should you need a spare for your old key.

This key uses an ID47(Hitag3) NCF295xX transponder chip and the remote transmits on 433.92 MHz FSK

This type pf smart key can only be programmed to the car using a special diagnostic device plugged into the vehicle. We can do this service for you for an additional fee or you can have it done locally to where you live.

To cut and code the new key to your vehicle usually takes 40-50 minutes. Please call and book an appointment for this service.

This remote has 3 buttons - LOCK - UNLOCK - BOOT

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

MK REF: SKMK5669-15060

MK BLADE REF: EBMK5670-00746

GEN BLADE REF: 81996-C5040