Holden Barina TK 2005 - 2011 compatible remote car key with ID48 transponder

CHEV-19 (A7 - DIAG)

New product

This aftermarket Holden Barina TK sedan compatible remote key can be used with the Holden Barina TK models where the original key has the same symbols on the buttons and also uses an ID48 transponder chip. 

Cutting & programming is NOT included in the price.

Service available at our East Victoria Park workshop only.

CAR MUST BE PRESENT AT TIME OF CUTTING KEY.

A7-DIAG

More details

$104.95 GST incl.

Shipping Rates

In 2005 Holden launched the new Barina TK sedan model which was a re-branded Daewoo Kalos and hence this key has a Daewoo key reference. The remote has a key symbol on the button that locks and unlocks the doors and a boot symbol on the boot button. Please check your key to ensure the symbols match exactly as otherwise this key may not be suited to your car.

This key blade profile is a JMA DAE-3D.P1 and is the same as a Silca DWO 4R or Orion DW 24.

In the case of the models listed above, they use highly encrypted ID48 transponder chips and so the vehicle MUST be present to make a new key as we need to gather data from the vehicle and the key using our special equipment to make a copy of the chip and to program the remote part.

The remote can only be programmed to the vehicle using a diagnostic scan tool by a licensed person. We are fully licensed in WA to do this kind of work.

Please allow a minimum of 30 minutes and up to 45 minutes for certain keys to be programmed.

Please call us on (08) 6110 2693 to book an appointment. Please specify make, model and year when making your booking.

We can also do a non remote key for this vehicle as spare as long as the door lock is working correctly in your vehicle.

The back of this remote key is secured with a screw. It is important to not over tighten this screw as it may strip the head making it very difficult to remote the back to replace the remote battery. Always use a good quality swrew driver when opening a remote key to avoid damaging the screw.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Frequency 433.92 MHz
No. of Buttons 2 BUTTONS
Shell Colour BLACK
Button Colour BLACK
Remote Programming Method DIAGNOSTIC TOOLS REQUIRED
Transponder Programming Method DIAGNOSTIC TOOLS REQUIRED
Battery Type CR1620 - 3V
LED Color RED
  • $95.00

    This aftermarket Daewoo compatible transponder key can be used with the Holden Barina TK model which is a re-badged Daewoo Kalos & Holden Viva which is a Daewoo Lacetti.  Cutting the key & cloning of the transponder chip, is included in the price. Service available at our East Victoria Park workshop only. CAR MUST BE PRESENT AT TIME OF CUTTING KEY. DAE-3D.P1

    $95.00
  • $8.95 In Stock

    CR1620 is a 3 Volt battery and measures 16 mm x 16 mm x 2.0 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...

    $8.95
    In Stock
  • $90.00 In Stock

    This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE

    $90.00
    In Stock

No customer reviews for the moment.

Write a review

Holden Barina TK 2005 - 2011 compatible remote car key with ID48 transponder

Holden Barina TK 2005 - 2011 compatible remote car key with ID48 transponder

This aftermarket Holden Barina TK sedan compatible remote key can be used with the Holden Barina TK models where the original key has the same symbols on the buttons and also uses an ID48 transponder chip. 

Cutting & programming is NOT included in the price.

Service available at our East Victoria Park workshop only.

CAR MUST BE PRESENT AT TIME OF CUTTING KEY.

A7-DIAG

Compatible Items

Follow us on Facebook

Brands