Isuzu D-Max or Holden Colorado 2 button fixed blade key case replacement

This key shell was used with both the Isuzu D-Max models between 2008 & 2012 and early Holden Colorado models also. It is distinctive in style with its high shine chrome plastic buttons and angular shape.

We know it can be very frustrating when the buttons on your key break and so it is difficult to press the button to lock or unlock the car. You don't need to worry or think that you must replace your entire remote.

Here we offer you a top quality replacement remote key case so that you can transfer your remote circuit board into this new case and have the key part duplicated and your are good to go. Key profile matches a JMA ISU-3D or Silca TOY 43R

Button symbols on this case are - LOCK & UNLOCK. 

The transponder chip in this key sits in a slot in the shell and is often super glued into place. You will need to take care when removing the chip to not damage it. We have found that sometimes it is easier to clone the chip and place the cloned chip in the new shell and leave the old chip in the broken shell as a spare in case anything happens to the new one. An additional charge will apply for this service.

It is always a good idea to test the battery as you have the remote open anyway. This can be done using a multi-meter if you have one. 

The change over is pretty easy to do yourself or come into our shop in East Victoria Park and we will duplicate the key, swap the remote over for you, test the battery, clean the circuit board and check that the transmitter is functioning correctly afterwards.

Please note we do charge a fee for this service of $50.

We can also re-solder buttons to the circuit board if needed.

RK CODE: DPIZ-SHELL1

RP CODE: RPKIS-KS02