Hyundai Accent 2006 - 2010 remote key shell with 1 button on side of shell - HYN-10

This type of side button key shell is used with a number of models of Hyundai but it is very important to note that there are 3 different key blade profiles and so it is important to check your key against the photos to ensure you select the correct key shell.

This shell has matches the Silca HYN-10 or JMA HY5 key blade profile.

This key type was used with:

The information in the table above is intended as a guide only. Please ensure you correctly identify the key blade profile of your current key against the photos to select the correct shell.

If your original key shell is damaged you don't need to replace your entire remote key. This replacement 1 button remote key shell will allow you to swap over the remote module and transponder chip from your broken key to a new case and once the blade it cut to match you will essentially have a new key.

If you come into our East Victoria Park shop we will be happy to cut the key, swap over your case and test your battery, while you wait. It is always best to have the car present when getting the key cut so it can be properly tested. 

WE CHARGE $40 TO CUT THE KEY, TRANSFER THE TRANSPONDER AND PCB, CHECK BATTERY AND CIRCUIT BOARD TO ENSURE IT IS TRANSMITTING CORRECTLY - THIS SERVICE IS ONLY AVAILABLE AT OUR EAST VICTORIA PARK SHOP IN PERTH W.A.

If you do not live close by you can of course order this key shell and take it to your local key cutting shop and have them cut the blade to match your existing key. Then you can swap the remote module into the new shell and you are up and running.

There are lots of cheap key shells on the market and we have tested lots of other brands but this key shell is definitely the best quality replacement we have tested. The machining of the key blade is very exact and so the key works well once it is cut correctly.

A variance of even as little as 0.01mm can make a huge difference to how well a key works and so it is vital to get your key cut at a reputable key cutter who regularly calibrates their key machine.

It is very important to use a quality screw driver when doing up the screw as the screw in this keys is very small and over tightening the screw will damage the new shell.

PRO CODE: RPKHY-KS34