4D-ART (G9 - P74)
This long slim remote from 4D Doors is called the Art.
It features 4 buttons and has a green LED.
The remote works with 4D Doors motors models GA103, GA203, GA403 and GA501 made after 2015.
IF YOUR OLD 4D DOOR REMOTE HAS A GREEN LED - THIS IS THE CORRECT REMOTE FOR YOU.
G9 - P74
Genuine Art remote from 4D Doors for use with a number of their high end garage door motors manufactured after 2015 where your current remote has a GREEN LED.
This remote can be used with the following motors as long as your current remote has the GREEN LED:
This remote can replace the older shaped remotes with the GREEN LED also when used with one of the models above.
The remote has a solid contruction with 4 screws in the back to hold it all together. These must be carefully removed to replace the battery.
The total number of remotes that can be stored in your garage door motor will depend on which receiver card is fitted to the motor:
4-pin receiver can hold 35 handsets.
2-pin receiver can hold 120 handsets (stored in the operator).
NANO receiver can hold 150 handsets.
The Art remote uses a CR2032 battery and comes with a battery already fitted but you can also purchase a spare from the compatible item tab on this page.
We will provide coding instructions to code the new remote to your motor if you do not have your user manual, please just let us know which model you have.
All our remotes are supplied with easy to follow instructions on how to program them to your garage or gate motor. To ensure you get the most appropriate instructions please tell us the model of the motor you are going to use the remote with in the comment section of the checkout.
We offer a 12 Month Warranty on all genuine remotes in line with the manufacturer conditions, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.
If you have any issues during programming please call us and we will talk you through it. We can also come and program your new remote anywhere across the Perth metro area just select Deliver and Program as your preferred delivery method at Checkout.
This product meets AS/NZS 62368.1 Clause 4.8 Safety Standards 2020 for products containing button/coin batteries.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
|No. of Buttons
|Remote Programming Method
|LEARN TO RECEIVER
|Dimensions in mm (L x W x D)
|80 x 26 x 13
|CR2032 - 3V
CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...
No customer reviews for the moment.