BMW 3 series E46 E90-93 X1 E84 & Z4 E89 full proximity smart key with comfort access

This OEM style BMW Proximity remote slot key can be coded to a large list of vehicles as listed below as long as the vehicle has comfort access active.

Non-proximity means you must press a button on the remote to open the doors and the key must be in the slot in the dash to start the car. If you do not have to place your existing key in the slot to start the car and you don't have to press any buttons to unlock the car it is a proximity smart remote key. This feature is also referred to as comfort access.

Each car can only have a maximum of 2 full proximity remote keys with full comfort access.

These keys must be coded as keys 1 & 2.

Any additoonal keys coded to positions 3 to 9 will be non-proximity remote slot keys and do not have that comfort access feature. 

This key can be coded to the following vehicles:

Vehicle Compatibility

2003 - 2013 3 Series (E46, E90, E91, E92 & E93)
2010 - 2015 X1 (E84 & E84 LCI)
2009 - 2016 Z4 (E89 & E89 LCI)

The information in above is intended to be used as guide only and so if you are unsure please feel free to email or call us to discuss your needs.

Coding a new key to your vehicle will normally take 45 - 60 minutes. Please call for a booking to avoid a long wait. 

This key is predominantly used with vehicles fitted with CAS 3 or CAS 3++. If the vehicle has had the ISTAP security update this will add additional time to the programming time. We cannot tell what software the CAS is running until we plug in the diagnostic device and so please allow extra time if possible so that the work can be completed correctly.

All of our remotes and keys are covered by a 12 month warranty and all coding is carried out by a licensed professional. Please do not trust your vehicle to an unlicensed person to do this type of coding. Using an unlicensed person to carry out this work can end up costing you a considerable amount of money when things go wrong and being unlicensed they will also not be covered by any liability insurance for the work they are doing.

We are licensed in WA to do diagnostic coding and our license number is MRB8165. Always ask to see the persons license before you allow them to do any work on your vehicle. 

MK REF: MK2733-03050

SG REF: SK-BM-3B-2-06890

This product complies with Consumer Goods (Products Containing Button/Coin Batteries) Safety Standard 2020.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).