The B01-3-BSC is a 3 button flipkey featuring a standard type transmitter and is compatible where the original remote or flip key uses a standard transmitter.
Using our in-house tools we can generate a new remote to suit your vehicle allowing you to get a flip-key for a fraction of the cost of a genuine dealer key.
THE PRICE QUOTED HERE IS FOR 1 FLIP-KEY
THE TRANSPONDER CHIP AND KEYBLADE ARE SOLD SEPARATELY
NO DIAGNOSTIC PROGRAMMING IS INCLUDED IN THIS PRICE
If your original remote has a Crystal Transmitter you need one of the B-Series Crystal flip-keys.
If you arrived at this page having clicked a link on a genuine product page that matches your current key or remote then this flip key is compatible with your item. Even if you currently have a separate key and remote fob in many cases we can combine both into a stylish flip key like you see here.
IF YOU HAVE ARRIVED AT THIS PAGE ANY OTHER WAY THEN THIS ITEM MAY NOT BE COMPATIBLE WITH YOUR CURRENT KEY AND REMOTE AND SO YOU SHOULD SEARCH FOR THE GENUINE PRODUCT MATCHING YOURS AND SELECT A COMPATIBLE ITEM FROM THERE.
Using this technology we can generate a remote for over 600 different vehicles across 40 car brands including Ford, Holden, Toyota, Lexus, Hyundai, KIA, Mazda, Mitsubishi, Nissan, Subaru, Honda, VW, Audi, Chevorlet, Chrysler, Jeep, Dodge, Chery, Cadillac, Citroen, Daihatsu, Geely, GMC, Isuzu, Iveco, Jaguar, Landrover, Lincoln, Opel, Peugeot, Proton, Renault, Seat, Skoda, SSangyong, Suzuki, Tata, Zhongxing and more.
There are new vehicles being added to the list all the time and we will do our best to keep this website up to date but if you cannot find an aftermarket option for your key or remote feel free to get in touch as it may have just been added or be in the testing phase.
There are two distinct types of these flip keys the B-Series standard Transmitter and the B-Series Crystal transmitter. The shell or case on both will look very similar and both can take a separate transponder chip which we use to clone the immobiliser information from your key to. The transmitter for the remote however is different and so you can only choose from the ones shown under the Compatible Items Tab on your original product page.
If you are not certain that the remote you have is compatible please feel free to email us a photo of the remote or key with year make and model of your vehicle and we will be more than happy to help you work out which remotes or flip keys you can purchase.
All our remotes and flip keys will require programming or cloning and so it is always best to call ahead or use our CLICK & COLLECT option at checkout so we can then ensure the key you want is in stock and arrange a time for you to bring your vehicle in so we can cut the key and program it. This usually takes less than an hour but can take much longer for some vehicles.
We offer a 12 Month Warranty on all remotes and flip keys, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
|No. of Buttons
|Dimensions in mm (L x W x D)
|70 x 34 x 17
|CR2032 - 3V
No customer reviews for the moment.