MK3862 (A24 - DIAG)
New product
Fiat 3 button flip key for use with Fiat Ducato 3 vehicles with a Magneti Marelli BSI.
PLEASE NOTE - MANY FIAT KEYS LOOK THE SAME BUT USE DIFFERENT CIRCUIT BOARDS INSIDE.
PLEASE CAREFULLY READ THE INFORMATION BELOW TO CHECK IF THIS KEY IS SUITABLE.
A24 - DIAG
Warning: Last items in stock!
Availability date:
This after-market Fiat 3 button flip key can be used with the following vehicles as long as the build date and Chassis details match:
VEHICLE | CHASSIS | YEAR FROM | YEAR TO |
FIAT DUCATO 3 | ZFA250 | 2010 | 2015 |
FIAT DUCATO 3 | ZFA250 | 2015 | 2021 |
IVECO DAILY | 300 | 2012 | ONWARD |
The information in the table above is provided by the maker of this key and is intended to be used as a guide only. If you are not sure, you can email us a photo of the VIN sticker on the door frame of your vehicle and we will help you decide which key is correct for you.
Please note Ducato 4 keys look the same but use a completely different transponder chip inside.
This type of key will need to be pre-coded with information from the vehicle to make it into a "dealer key" before it is added to the vehicle. To do this a working key will be needed and special diagnostic equipment connected to the vehicle.
THIS IS WHY WE DO NOT SELL THIS KEY ONLINE
We can carry out the coding for you at our East Victoria Park workshop in WA. The vehicle must be present for us to program the new key to it.
Additional fees apply to cut & program the flip key and you will need an appointment.
Under the Compatible items section you will see the cost to cut and program a key we have supplied and you will also see we sell replacement casings for this type of flip key, so if your electronics work but the case is damaged you can swap it all over and save quite a bit.
Precoding and programming Fiat keys can take up to an hour to complete on some vehicles but is generally finished well inside an hour in most cases. Call us on (08) 6110 2693 to book an appointment.
This flip-key uses the common Silca SIP22 or JMA FI-16 key blade profile.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
AK REF: NLK-FIAT-28-433-0125
CN REF: CN017020-02486
MK REF: MK3862-02113
Frequency | 433.92 MHz |
No. of Buttons | 3 BUTTONS |
Shell Colour | BLACK |
Button Colour | BLACK |
Remote Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Encryption Type | ROLLING CODE |
Transponder Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Dimensions in mm (L x W x D) | 69 X 32 X 19 |
Battery Type | CR2032 - 3V |
LED Color | NO LED |
CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...
This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE
Fiat compatible 3 button flip key case for when your key shell is broken but the electronics still work. FLIP KEY CASE ONLY - NO ELECTRONICS INCLUDED We charge an additional $50 to cut the new key and swap over all the electronics. S27
No customer reviews for the moment.