Hyundai Kona 2017 onward genuine 3 button flip key 95430-J9800

95430-J9800 (A9C-DIAG)

New product

This genuine Hyundai 3 button flip key is compatible with Hyundai Kona models from 2017 onward where the part number matches 95430-J9800 - On the back or inside your remote you should see a sticker with the part number and 95430-J9800

Please note key blade & programming are NOT included in the price. 

A9C - DIAG

More details

$284.95 GST incl.

Shipping Rates

This genuine Hyundai 3 button remote flip key is suitable for Hyundai KONA models manufactured after 2017.

HYUNDAI MODEL YEAR FROM - TO
KONA 2017 ONWARD

This table is intended as a guide only and so if you do not see your car in the list but you use a key that looks identical to this one, please email us details of your vehicle (YEAR - MAKE - MODEL - VIN) and a photo of the key and we will assist you to choose the correct replacement key for your vehicle.

This style of flip key is different in shape to the earlier versions and is used on a number of newer Hyundai Models. Even though it may look the same as your key, you must confirm the part number matchesas the coding ont he circuit board and the type of transponder chip will vary between models.

This flip key also uses a very specific key blade with the number 752 stamped into it. It requires a specific roll pin also to secure the key blade. Both of these items are sold separately and can be added to your order under compatible items.

To check the part number on the key check the back to see if the sticker is still there and has the part number 95430-J9800 on it.

Otherwise carefully remove the back cover and check the details printed on the battery cover match those in the photos on this listing.

This should include:

TRANSMITTER ASSY (OS)

MODEL: OKA-450T

ANATEL: 02406-16-05956

The remote comes with a battery already fitted and the battery type is listed under "Compatible Items" should you need a spare for your old key.

This key uses an ID60 (4d+ dst40) transponder chip and the remote transmits on 433.92 MHz FSK

THERE ARE A NUMBER OF IDENTICAL LOOKING REMOTES THAT USE A DIFFERENT TRANSPONDER CHIPS

IF YOUR REMOTE NO LONGER HAS THE PART STICKER ON THE BACK OR INSIDE - YOU WILL NEED TO HAVE THE CHIP IN YOUR KEY SCANNED TO IDENTIFY WHICH ONE IT IS OR SUPPLY YOUR VIN NUMBER SO WE CAN CONFIRM THIS IS THE CORRECT KEY FOR YOU.

This type of flip key can only be programmed to the car using a special diagnostic device plugged into the vehicle. We can do this service for you for an additional fee or you can have it done locally to where you live.

To cut and code the new key to your vehicle usually takes 30-40 minutes. Please call and book an appointment for this service.

This remote has 3 buttons - LOCK - UNLOCK - BOOT

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

MK REF: MK2233-07133

GEN REF: 95430-J9800-33596

GEN KB REF: 81996-J9000-03284

GEN PIN REF: 81926-J9000-00457

Frequency 433.92 MHz
No. of Buttons 3 BUTTONS
Shell Colour GREY
Button Colour BLACK
Remote Programming Method DIAGNOSTIC TOOLS REQUIRED
Transponder Programming Method DIAGNOSTIC TOOLS REQUIRED
Dimensions in mm (L x W x D) 72 x 40 x 19
Battery Type CR2032 - 3V
LED Color RED
  • $8.95 In Stock

    CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...

    $8.95
    In Stock
  • $90.00 In Stock

    This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE

    $90.00
    In Stock
  • $19.95 In Stock

    Genuine OEM Hyundai key blade stamped 752 to suit Hyundai Kona 2017 - 2019 - Hyundai Venue 2019 onward or Hyundai Santa Fe 2018 onward with either part number 81996-J9000 or 81996-S1000. KEY BLADE ONLY - ROLL PIN AND REMOTE SOLD SEPERATELY A9D

    $19.95
    In Stock
  • $4.95 In Stock

    This genuine roll pin with part number 81926-J9000 is used to secure the key blade in the flip key type shown in the attached photos. THIS IS A HYUNDAI PART BUT IS ALSO USED IN SOME KIA FLIP KEYS A9 

    $4.95
    In Stock

No customer reviews for the moment.

Write a review

Hyundai Kona 2017 onward genuine 3 button flip key 95430-J9800

Hyundai Kona 2017 onward genuine 3 button flip key 95430-J9800

This genuine Hyundai 3 button flip key is compatible with Hyundai Kona models from 2017 onward where the part number matches 95430-J9800 - On the back or inside your remote you should see a sticker with the part number and 95430-J9800

Please note key blade & programming are NOT included in the price. 

A9C - DIAG

Compatible Items

Follow us on Facebook

Brands