B&D TB5 V2 Tritran aftermarket replacement garage remote with 4 buttons

Used extensively for both garage sectional and roller doors and automatic gates the B&D TB5-V2 is a very popular remote and this stylish and strong aftermarket remote offers a more cost effective solution for these systems. 

It can be used to replace a number of previous B&D & Easylifter remotes including:

B&D TB5V1 62731 (black buttons)

B&D 062730

B&D 70241 Red,

B&D 70241 Orange,

B&D 70241 Pink,

B&D 062733 Wall Mount

B&D 70237.

This remote is compatible with a large number of roller door and sectional door motors. All new B&D Controll-A-Door openers now feature unique Tri-Tran multi frequency operation. Tri-Tran has an automatic frequency change function, with each of its three frequencies transmitted having a much tighter bandwidth.

The frequency changes every 22mS during a transmission and reception. So if there is another signal interfering on a part of this frequency spectrum, the automatic change ensures the signal still reaches the opener. This makes Tri-Tran up to one thousand times better, in terms of in band interference rejection, than a typical FM receiver, and up to a million times better than some AM receivers.

Suits models - B&D Tri-Tran openers only,

B&D Control-A-Door P,

B&D Control-A-Door P Diamond,

B&D Control-A-Door P Diamond Whisper Quite,

B&D Control-A-Door Diamond Power Drive

Take a look at the photos for full compatibility. Operates on 433.92mhz.

If you are not certain that the remote you have is compatible please feel free to email us a photo of the remote and your motor and we will be more than happy to help you work out which remote to purchase.

All our remotes are supplied with easy to follow instructions on how to program them to your garage or gate motor. To ensure you get the most appropriate instructions please tell us the model of the motor you are going to use the remote with in the comment section of the checkout.

THIS AFTERMARKET REMOTE HAS 2 SETS OF CODES INSIDE - IF WHEN TRYING TO PROGRAM IT TO YOU B&D MOTOR IS DOES NOT PAIR WITHT HE MOTOR - YOU CAN HOLD DOWN BUTTONS 3 & 4 TOGETHER - THE LED ON THE REMOTE SHOULD BE SOLID AND THEN GO OUT - YOU CAN NOW RELEASE THE BUTTONS AND TRY PAIR IT WITHT HE MOTOR AGAIN.

We offer a 12 Month Warranty on all genuine remotes in line with the manufacturer conditions, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.

If you have any issues during programming please call us and we will talk you through it. We can also come and program your new remote anywhere across the Perth metro area just select Deliver and Program as your preferred delivery method at Checkout.

WARNING! 

This product uses an alkaline battery and so it is exempt from the AS/NZS 62368.1 Clause 4.8 Safety Standards 2020. 

Alkaline batteries are hazardous and should be kept out of reach of children at all times. 

Alkaline batteries may explode or leak causing injury if not used correctly. Do NOT recharge, do NOT dispose of batteries in a fire, do NOT install batteries incorrectly, do NOT mix new with used batteries, do not short circuit, do not ingest, do not mix with other types of batteries. 

Where possible please ensure you recycle used alkaline batteries safely