Elsema Penta PCR43304R 4 channel receiver for Penta remotes

This Elsema PCR43304R receiver is compatible with Elsema PentaFOB and PentaCODEremotes. It has four relay outputs which can be switched “on” and “off ” independently. The relays are capable of switching loads of up to 10 Amps at 240Volts AC.

The PentaCODE® dual coding system gives the installer the option to use the classic 12-way dip switch coding with Pentacode remotes or one of over 17 billion encrypted codes and the PentaFob remotes.

With the 12-way dip switch, just match the Pentacode keyring remotes and the receiver's dip switch and it's coded.

With the encrypted code you switch all the 12-way dip switches OFF and the remote and receiver automatically goes into the encrypted coding. Please see coding instructions for encrypted coding procedure pf thr PentaFob type remotes.

The receiver is covered by a 2 year manufacturers warranty.

SPECIFICATIONS:

Supply Voltage: 11.0 – 28 VAC/DC. Can use Elsema DC or AC power supply, 12PP1000 or 24PP.
Current Consumption: 19 mA standby
Operating frequency: 433.100 to 434.700 MHz
Sensitivity: Better than 0.316µV (-117dBm)
Relay Output: Four channel over relay outputs, rated at 10 Amps / 240VAC
Antenna: Elsema ANT 433MHz series
Dimensions: 130 x 70 x 20mm
Useable Transmitters: All Elsema type PCK433 & FOB433 series
Ideal for Industrial Automation, eg Crane Control, winches, wireless cement truck operation.

Compatible remote controls can be purchased from the Compatible items tab.