Mongoose M60 Series N4096 Z333 2 button car alarm remote control RMM08

This new shape Mongoose MRC60 2 button car alarm remote works with a number of different M60 series car alarm, central locking or immobiliser systems made before 2009 

It operates on 434 MHz and has a GREEN LED - REPLACING THE OLDER VERSION WITH THE RED LED AS SHOWN IN THE PHOTOS.

Later model M60 systems made from mid 2009 to 2011 were supplied with very different looking 3 button chrome & black remote control with a BLUE LED which operates on 303.9 MHz. M60 systems made after 2011 were also a chrome & black 3 button remote with a green LED. 

The circuit board of the old shape MRC60 remote should have the following numbers printed on it - HPD52-1. The remote has no model number on the case and there are other very similar looking remotes on the market that are not the same so it is vital you check what system is fitted to your vehicle before purchasing this remote.

The back cover of the old MRC60 remote just has the N4096 Z333 compliance number on it where as this new shape remote has "MADE IN TAIWAN - FCC ID:KT0ND20108" embossed on the back.

If you do not have a working remote you will need to find your over-ride code from the owners manual.

Below you will see the coding instructions for the the M60 systems that this remote can be used with.

To learn new remotes to M60 models:

1. Disarm by existing remote, or use the override
2. Open the drivers door and leave open
3. Turn the ignition ON/OFF 3 times - siren chirps
4. Press arm button on first remote (siren chirps)
5. Press arm button on second remote (siren chirps)
6. Repeat for any other remotes
7. Wait 10 seconds for learning process to complete