Sherlo Tronics Elegant wall mountable white single button remote transmitter

The Sherlo Tronics WMTX-ELEG is a flush mountable wireless wall remote transmitter with the following characteristics:

Dimensions -      W X  H  X D

FACE PLATE       70 X 95 X 3.5

RECESS PART    49 X 75 X 12.5

The transmitter is compatible with the various Sherlo Tronics receiver units including:

RX1-150

RX2-150

RX3-150

RX1-500

RX4-500

The back plate can either be surface mounted to a wall or it can be recessed into the wall to allow for a more flush mounting of the transmitter. Please not you will need to be able to get a flat blade screw driver under the face plate to open the remote to replace the battery.

Full manufacturer instructions are available by scanning the QR code on the back of the package. 

We offer a 12 Month Warranty on all genuine remotes in line with the manufacturer conditions, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.

PCODE: SHERLO-WMTX-ELEG

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).