PAX-II 800 & VCW 1200N sectional garage door SDDMCU1B compatible HFY564A remote control

This OEM remote control is suited to sectional or panel garage door motors as shown in the photos with a label showing the model as PAX-II 800 where your remote has one of our stickers on the back marked MCU1B or the circuit board inside is marked SDDMCU1B. 

You will see in the photos that the original remotes are marked SDDMCU1B on the circuit board, where as this replacement remote is marked HFY546A on the top of the circuit board.

These motors have been used by a large number of garage door companies around Australia including Gryphon Garage Doors. The majority of the motors have no brand name on them and only feature a small sticker on the side up near the ceiling as shown in the photos. You must check this carefully to ensure your motor is the same model as there are many very similar looking motors produced like this.

There are many other remote controls which also ook similar to this new style remote, but will not work with your garage door motor unless it has the PAX-II 800 sticker and your original remote has one of our stickers on the back marked MCU1B or the circuit board inside is marked SDDMCU1B.

YOU MUST CHECK THAT THE CIRCUIT BOARD INSIDE YOUR REMOTE MATCHES THE ONE IN OUR PHOTOS - IF IT DOES NOT THEN PLEASE SEND US A PHOTO OF THE FRONT AND BACK OF THE REMOTE AND THE CIRCUIT BOARD.

WILL NOT WORK WITH SUPERLIFT BRANDED MOTORS

The PAX-II motors can take a maximum of 20 remotes in the memory. If you have lost some remote controls over the years and try to add more new ones, but reach the maximum the display will show "Fu" and you will need to clear the memory and then re-code all the existing remote controls.

The control panel on the PAX-II motor has 4 buttons which read UP - DOWN - CODE & SET.

There are many similar looking motors which have K1, K2, K3 & K4 on the buttons and this remote will NOT work with those motors. 

The remote is provided with easy to follow istructions to code it to your garage door.

If you are not certain that this remote is correct for your motor, feel free to email us some photos of the remote you have now and the motor it is used with. We will assist from there to identify the right remote for you.