88835AG010 (A22 - DIAG)
New product
Genuine Subaru 3 button smart key suitable for use with a number of Subaru models as listed below.
Your original key should have DENSO 14ACA on the front cover & 271451-0780 on the PCB
A22 - DIAG
Warning: Last items in stock!
Availability date:
This genuine Subaru 271451-0780 Denso 14ACA compatible 3 button smart proximity key to suit the following models as long as your original key matches the circuit board number 271451-0780.
SUBARU MODEL | YEAR FROM | YEAR TO |
FORRESTER | 2009 | 2012 |
IMPREZA (GE & GH) | 2007 | 2011 |
IMPREZA (GR & GV) | 2007 | 2014 |
LEGACY | 2009 | 2014 |
LIBERTY | 2009 | 2014 |
The information listed in the table above is intended to only be used as a guide. You should confirm that the part number on the front of your remote is DENSO 14ACA and the circuit board in your original remote has a PCB ID - 231451-0780 printed on it as shown in the photos attached to this listing.
THIS TYPE OF PROXIMITY KEY REQUIRES A SECURITY ID NUMBER TO ALLOW A NEW KEY TO BE PROGRAMMED. A METAL TAG WITH THIS SECURITY ID WAS SUPPLIED WITH THE ORIGINAL KEYS.
IF YOU DO NOT HAVE THIS SECURUTY ID IT CAN TAKE UP TO 2 HOURS EXTRA TO PROGRAM A KEY AS THIS NUMBER WILL NEED TO BE EXTRACTED. PLEASE CHECK PHOTOS FOR MORE INFORMATION ON WHAT THE TAG LOOKS LIKE.
If you are not certain that this key matches what you have, please feel free to email us some photos of your key and circuit board. Please take care when opening your remote to not damage the case. If you need assistance to do this you can always pop into our shop and we will happily check the details of your key for you.
This proximity remote is supplied with a battery.
The emergency key is not included and should be added to your order from the compatible items tab below.
You can also purchase additional batteries under the Compatible items tab.
This remote key uses an 4D+ DST40 proximity transponder and transmits on 433 MHz for the Australian market.
This type of proximity key can only be programmed to your vehicle by plugging in a specific diagnostic device to the vehicle. This work is done by licensed locksmiths, some mechanics or auto-electricians. We are licensed to do this work in WA and so can supply the key, cut the emergency blade and program the remote at our workshop in East Victoria Park WA.
We charge $90 for this service on keys we have supplied as long as you have the Security ID. If you do not have the security id the fee to extract this and program the new remote will be $150.
Please call us on (08) 6110 2693 to book an appointment. We will need the car for around 45 minutes usually.
Losing your only key for this type of vehicle can be an extremly costly event so we strogly reccomend you get a spare key to avoid a much bigger bill and a lot of stress. Programming a key when there is a working key is fairly straight forward but becomes much more complex and costly if there is no working key.
This product complies with Consumer Goods (Products Containing Button/Coin Batteries) Safety Standard 2020.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
TTK REF: 88835AG010-27611
LSC REF: 88835AG010-46503
Frequency | 433.92 MHz |
No. of Buttons | 3 BUTTONS |
Shell Colour | BLACK |
Button Colour | CHROME |
Remote Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Transponder Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Dimensions in mm (L x W x D) | 68 x 39 x 14 |
Battery Type | CR1632 - 3V |
LED Color | RED |
CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...
This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE
Aftermarket 57497AG400 emergency key blade to fit the Subaru proximity remote with Denso 14ACA printed on the front, as shown in the photos. KEY CUTTING AND PROGRAMMING NOT INCULDED IN THE PRICE. A22
No customer reviews for the moment.