Tilt-A-Matic or Door-Mate compatible SGT270 1 oval grey button alternative remote control

SGT-270 (G31 - P40)

New product

This aftermarket 1 oval grey button remote control is used as a replacement for a number of remotes on 303mhz from Tilt-A-Matic, Door-Mate, B&D, Magic-Key etc with an 8 DIP SWITCH fixed code

This remote can also be copied on the generic cloning remote in store or with the SMG-ROLL nose to nose cloning remote as long as you have a working remote.

G31 - P40

More details

$49.95 GST incl.

Shipping Rates

This very plain remote with one oval GREY button operates on 302.98 Mhz and can be used to replace a host of older garage door remotes from brands such as Tilt-A-Matic, Door-Mate, B&D, Magic Key etc . Take a look at the photos to see which other remotes are compatible with this one.

The remote does have the part details SGT270 embossed on the back of the remote as shown in the attached images.

This remote uses a 8 dip switch block on the PCB to set the fixed code. You should check the frequency of your remote is either 302.98 MHz or 303 MHz and confirm it also has 8 dip switches inside it.

If you are not certain that the remote you have is compatible please feel free to email us a photo of the remote including the inside of the remote and we will be more than happy to help you work out which remote to purchase.

The majority of fixed code remotes can be cloned onto a generic replacement or can be copied remote to remote using a nose to nose copy remote. Once cloned the remote should work immediately as the receiver will recognise the new remote as being the same as the old working remote you cloned it from.

All options for this remote are shown under the Compatible Items Tab.

We offer a 12 Month Warranty on all genuine remotes in line with the manufacturer conditions, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.

If you have any issues during cloning please call us and we will talk you through it. 

WARNING! 

This product uses an alkaline battery and so it is exempt from the AS/NZS 62368.1 Clause 4.8 Safety Standards 2020. 

Alkaline batteries are hazardous and should be kept out of reach of children at all times. 

Alkaline batteries may explode or leak causing injury if not used correctly. Do NOT recharge, do NOT dispose of batteries in a fire, do NOT install batteries incorrectly, do NOT mix new with used batteries, do not short circuit, do not ingest, do not mix with other types of batteries. 

Where possible please ensure you recycle used alkaline batteries safely

Frequency 303mhz
No. of Buttons 1 BUTTON
Shell Colour BLACK
Button Colour GREY
Remote Programming Method CLONEABLE FIXED CODE
Encryption Type FIXED CODE
Visor Clip Included NOT AVAILABLE
Dimensions in mm (L x W x D) 54 x 40 x 13
Battery Type 23AE - 12V
LED Color RED
  • $49.95

    This remote control can be used to clone fixed code garage door, gate, alarm & roller shutter remote controls which are no longer available to purchase or where you simply want a smaller remote option. This can only be done in our East Victoria Park store with a WORKING remote to copy codes from. PCODE: RC-01-A

    $49.95
  • $44.95 In Stock

    This aftermarket 1 oval red button remote control is used as a replacement for a number of remotes on 303mhz from Tilt-A-Matic, Door-Mate, B&D, Magic-Key etc with an 8 DIP SWITCH fixed code This remote can also be copied on the generic cloning remote in store or with the Multi 4 nose to nose cloning remote as long as you have a working remote. G31 - P40

    $44.95
    In Stock
  • $49.95 Product available with different options

    This 4 button cloning remote can be used to clone both fixed code or rolling code remote controls between 280 MHz to 868 MHz. You can clone a different remote function to each button to combine more than one remote into just 1. Available in 5 different colours. G38 & G39 - P72

    $49.95
    Product available with different options

No customer reviews for the moment.

Write a review

Tilt-A-Matic or Door-Mate compatible SGT270 1 oval grey button alternative remote control

Tilt-A-Matic or Door-Mate compatible SGT270 1 oval grey button alternative remote control

This aftermarket 1 oval grey button remote control is used as a replacement for a number of remotes on 303mhz from Tilt-A-Matic, Door-Mate, B&D, Magic-Key etc with an 8 DIP SWITCH fixed code

This remote can also be copied on the generic cloning remote in store or with the SMG-ROLL nose to nose cloning remote as long as you have a working remote.

G31 - P40

Compatible Items

Follow us on Facebook

Brands