Audi A4 A5 A6 A7 Q5 Q7 S4 S5 proximity keyless go 3 button key fob

SKMK2625 (A23 - DIAG)

New product

Audi compatible 3 button PROXIMITY KEYLESS GO key fob suits a number of Audi models including A4 A5 A6 A7 Q5 & Q7

This proximity KEYLESS GO key does not need to be placed in the dash slot to allow the vehicle to start and has a PCF7945AC proximity type chip

CUTTING & PROGRAMMING NOT INCLUDED IN THE PRICE

A23 - DIAG

More details

$395.00 GST incl.

Shipping Rates

Most Audi vehicles using this style of key fob have 2 different types - PROXIMITY FOB OR NON-PROXIMITY FOB

This proximity fob will allow you to start the vehicle by pressing the Start/Stop button when the key is anywhere inside the vehicle (so in your bag or your pocket etc). You can also lock or unlock the car by simply touching the sensor on the drivers door handle.

A non-proximity fob must be placed in the slot in the dash to allow you to start the vehicle. You must also press the button on the fob to unlock or lock the car.

The part number will vary from model to model and could include the following numbers:

8T0 959 754 F
8T0 959 754 J

THIS LISTING IS FOR A PROXIMITY KEYLESS GO FOB.

A KEYLESS GO PROXIMITY FOB CAN ONLY BE PROGHRAMMED TO YOUR VEHICLE IF THE VEHICLE HAS THE NECESSARY SENSORS IN THE DOORS ETC.

This fob suits a long list of Audi vehicles including these listed below:

MODEL YEAR FROM YEAR TO BCM TYPE
AUDI A4 2008 06/2014
AUDI A4 06/2014 08/2016 ENCRYPTED
AUDI A5 2008 06/2014
AUDI A5 06/2014 08/2016 ENCYYPTED
AUDI A6 2011 2018
AUDI A7 2010 2018
AUDI Q5 2008 06/2014
AUDI Q5 06/2014 2017 ENCRYPTED
AUDI Q7 2012 2014
AUDI S5 2012 2013

It is important to note that for some late models of the above vehicles, the immobiliser data may be stored on an encrypted BCM on the vehicle and so normal programming of a spare key will not be possible. The only way to know for certain is to connect a scan tool to the vehicle and check the type of BCM present. The vehicles highlighted in red above are those most commonly fitted with an encyypted BCM.

The process to add a key to a vehicle with an encrypted BCM is much more complex and takes a few hours to complete. This would add approx $250 to the cost of a spare key.

The process to program a key via OBD is covered under the standard cut & program cost shown under Compatible Items.

If your fob works but just needs a new case to smarten it up or to replace a damaged case, you will find this under Compatible Items

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Frequency 433.92 MHz
No. of Buttons 3 BUTTONS
Shell Colour CHROME & BLACK
Button Colour CHROME
Remote Programming Method DIAGNOSTIC TOOLS REQUIRED
Transponder Programming Method DIAGNOSTIC TOOLS REQUIRED
Dimensions in mm (L x W x D) 81 X 39 X 16
Battery Type CR2032 - 3V
LED Color RED
  • $8.95 In Stock

    CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...

    $8.95
    In Stock
  • $90.00 In Stock

    This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE

    $90.00
    In Stock
  • $29.95

    This high quality replacement case can be used to replace the damaged casing of your Audi key as long as the electronics in your orginal still work. REPLACMENT CASING ONLY - NO ELECTRONICS INCLUDED S65

    $29.95

No customer reviews for the moment.

Write a review

Audi A4 A5 A6 A7 Q5 Q7 S4 S5 proximity keyless go 3 button key fob

Audi A4 A5 A6 A7 Q5 Q7 S4 S5 proximity keyless go 3 button key fob

Audi compatible 3 button PROXIMITY KEYLESS GO key fob suits a number of Audi models including A4 A5 A6 A7 Q5 & Q7

This proximity KEYLESS GO key does not need to be placed in the dash slot to allow the vehicle to start and has a PCF7945AC proximity type chip

CUTTING & PROGRAMMING NOT INCLUDED IN THE PRICE

A23 - DIAG

Compatible Items

Follow us on Facebook

Brands