B11-2-28 (DIAG)
New product
This aftermarket 2 button flip key can replace the Foton Tunland flip key used from 2011-2019 onward which use the same style remote flip key as shown on the left of the 1st image.
CUTTING & PROGRAMMING THE KEY IS NOT INCLUDED IN THE PRICE
DIAG
Warning: Last items in stock!
Availability date:
This high quality stylish aftermarket 2 button flip key can be used instead of the genuine Foton flip key.
This key suits the Foton Tunland models from 2011 - 2019 where the original key you have looks identical to the one on the left side of the main image.
This key features an ID46 PCF7941 (HITAG2) type transponder. The remote and transpoder are programmed to the vehicle separately in 2 steps.
This key uses the Silca MIT11R equivelant key blade.
Programming the transponder chip and the remote can only be done by connecting a diagnostic device to the vehicle.
We offer this service at our East Victoria Park workshop and you can book an appointment by calling us on (08) 6110 2693. The service normally takes around 45 minutes and you should ensure you have all other keys for the vehicle present at the time as the process deletes all keys and then reprograms them back into the vehicle so any keys not present will no longer work.
You can of course get the key cut & programmed by your local automotive locksmith also. Please check with them that they are happy to program a flip key they have not supplied before placing an order.
Cutting and programming a spare key for your vehicle is much easier if you have a working key so we strongly advise all customers to always have a spare key to your vehicle. It will save you money and stress in the long run.
This key is supplied with a CR2032 battery already fitted and if you need a spare battery for your genuine flip key, you can purchase them from the compatible items section.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
Frequency | 433.92 MHz |
No. of Buttons | 2 BUTTONS |
Shell Colour | CHROME & BLACK |
Button Colour | CHROME |
Remote Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Transponder Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Dimensions in mm (L x W x D) | 71 x 36 x 20 |
Battery Type | CR2032 - 3V |
LED Color | RED |
CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...
This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE
The B11 2 button flip key uses a Standard Transmitter and is compatible where the original remote or flip key uses a Standard Transmitter. If your original remote has a Crystal Transmitter you need the B-Series Crystal flip-keys. Using our in-house tools we can generate a new remote and clone your transponder allowing you to get a flip-key for a fraction...
This carbon transponder chip can be known as an ID 46 - TP12 or PCF7936 Hitag 2. Used with many vehicles including Hyundai, Kia and Suzuki TP1 - DIAG
Mitsubishi compatible aftermarket flip key blade that fits our range of KD & XH flip keys and suitable for a huge number of Mitsubishi models with matching Silca MIT11R or JMA MIT-8D key blade profile. PLEASE LOOK VERY CLOSELY AT THE PHOTO TO AVOID ANY CONFUSION KD1
No customer reviews for the moment.