NB11-3-06 (DIAG)
New product
Citroen C4 (VF7LCNF VIN series) compatible aftermarket 3 button flip key, can be used with C4 models from 2003 to 2010 where the original remote circuit board matches the attached photos with an ID 46 chip and transmitting on 433 MHz ASK
CUTTING THE KEY AND CODING TO THE VEHICLE IS NOT INCLUDED IN THE PRICE
DIAG
Warning: Last items in stock!
Availability date:
Citroen C4 VF7LCNF VIN series vehicles from 2003 - 2010 came with an all black plastic 3 button flip key. These original Citroen flip keys had very small delicate micro-switches on the PCB inside and we see lots of these where either the flip key part breaks out or the button pads collapse on these tiny microswitches.
The Citroen C4 from 2003 - 2010 had a VIN number starting VF7LCNF.
Please check your VIN starts VF7LCNF........
This top quality 3 button flip key can be programmed to your Citroen C4 VF7LCNF vehicle offering a stronger and much more stylish solution.
The key will be precoded to suit this vehicle and must be programmed to the car using a diagnostic scan tool.
We can do this for you at our East Victoria Park workshop in WA.
WE DO NOT GENERALLY SELL THIS KEY ONLINE AS THERE IS SOME VARIANCE IN CODING USED WITHIN THE CITROEN C4 RANGE DURING THESE YEARS
This type of key has an integrated ID46 transponder chip on the circuit board and when this is programmed the car the remote part is also programmed at the same time.
Please note that as the original flip key 3rd button is for the lights the boot button on the new key will also activate the lights in the same way.
There are many very similar looking keys for Peugeot & Citroen vehicles but the coding on the circuit board is different in each vehicle and so it is vital you check the details of your vehicle matches before ordering.
These flip keys are very good quality and tend to be much stronger than the original flip keys that come with the vehicle.
The first image shows a size comparison between the 2 types of key so you can get an idea of the size of the flip key.
The flip key is supplied with a battery fitted and a key blade and roll pin. The key blade will need to be cut to match the vehicle and then it will need to be fitted to the flip key body using the roll pin supplied with it. Any locksmith will be able to do this for you if you are having it done locally where you live.
There is a recess on the back of the flip key where you can place a 14mm logo sticker if you wish but please note it is not supplied with one.
If your original key works but the keyshell is damaged you will find a compatible shell replacement listed under Compatible Items also.
If you have any questions please feel free to get in touch with us.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
Frequency | 433.92 MHz |
No. of Buttons | 3 BUTTONS |
Shell Colour | CHROME & BLACK |
Button Colour | BLACK |
Remote Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Encryption Type | ROLLING CODE |
Transponder Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Dimensions in mm (L x W x D) | 71 x 36 x 20 |
Battery Type | CR2032 - 3V |
LED Color | RED |
This key profile was used with a number of Citroen models as listed below. Cutting the key & cloning of the transponder chip, is included in the price. Service available at our East Victoria Park workshop only. CAR MUST BE PRESENT AT TIME OF CUTTING KEY. CIT-1.P
CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...
This aftermarket replacement Citroen 3 button flip key shell can be used to replace a broken flip key for quite a few Citroen models. This flip key shell has 3 buttons for lock, unlock & lights and the key profile matches JMA CIT-1 or Silca VA2 or VA6 Battery holder in back of shell. KIT INCLUDES FLIP-KEY SHELL ONLY - NO ELECTRONICS INCLUDED. S3
This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE
There are some car keys where the remote & transponder chip are part of the same circuit board and so can only be programmed using 1 diagnostic process. This flip key can be used to replace such keys for certain models of Chrysler, Dodge, Holden, Honda, Jeep, Nissan Peugeot and Citroen cars amongst others.
High quality flip key blade to suit a variety of aftermarket flip key bodies used with Citroen & Peugeot cars. Matches Silca VA2T or JMA CIT-1 key profile. KD2
No customer reviews for the moment.