Land Rover compatible smart 5 button proximity remote

This top quality aftermarket Land Rover smart proximity key can be added as a spare to many different Land Rover models from around 2010 onward, even those using the older style remotes with the chrome section down one side of the remote. 

The price shown is for programming a key to a Landrover NON-PEPS model built after 2018. If you would like a key of this style programmed to an earlier model please drop us a message as the price is considerably lower.

Models built after 2018 generally use what is known as OTP (One Time Porgrammable) RFA or KVM modules for the keyless entry system. Programming a spare key to these vehicle is very complex.

It is important to understand the system setup of your vehicle. There are 2 distinctly different set ups.

PEPS - Passive Entry Passive Start - These vehicles have a small dimple on the door handles which when touched will lock the vehicle as long as the key is within range. This is passive entry. When you get into the vehicle you just have to put your foot on the brake and press the start button to start the engine. This is Passive Start.

NON-PEPS - Non-Passive Entry with Passive Start - These vehicles do not have the round dimple on the door handles and so the user must press lock or unlock on the remote to lock or unlock the vehicle. When you get into the vehicle you just have to put your foot on the brake and press the start button to start the engine. This is Passive Start.

The difference between the 2 systems may seem quite insignificant, but the difference in the technology involved in programming a key to a PEPS vehicle over a NON-PEPS vehicle is significant.

While you may think the cost of this key is high, please remember getting a key for a vehicle like one of these from a Land Rover dealer will cost you between $2300 - $2500 generally.

This is a complex programming job and so please consider who you get to do the job very carefully.

The key comes with a battery fitted and with a blank emergency key blade inside which can be used to open the car door if the remote battery becomes flat. The emergency key will need to be cut to match your original key.

This aftermarket key looks and works just like an original but does not feature the Land Rover logo on the back of the case. The remote has 5 buttons for LOCK - UNLOCK - LIGHTS - BOOT - PANIC ALARM.

We do NOT sell this type of key to the public as most locksmiths will not program a key unless they have also supplied it. If you are a locksmith and wish to order one, please email us.

This key features the HU101 key blade profile which is cut using a milling type key machine often referred to as a wave cut or laser cut. Please see the attached images to understand how to remove the emergency blade from your remote.

We do also stock replacement cases for this style key is the outer casing is damaged on your original key, we can tidy that up for you. You will find the cases listed under compatible items below.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).