B11-2-39 (DIAG)
New product
This aftermarket 2 button flip key suits Ford Ranger PJ & PK models from 2006 to 2011 that use a Visteon Model No. 41835 remote and separate key.
CUTTING & PROGRAMMING NOT INCLUDED IN THE PRICE
DIAG
Warning: Last items in stock!
Availability date:
This aftermarket 2 button remote flip-key can be used with Ford Ranger PJ & PK Series models from 2006 to 2011. This remote transmits on 434 MHz and the key uses an ID8C Temic transponder chip inside it.
The transponser chip inside this key can only be coded to the vehicle using diagnostic equipment by a licensed locksmith or mechanic. We offer this service at our East Victoria Park workshop or you can have it done locally to you.
The remote part of the key is programmed using a manual process also referred to as an onboard process or in car programmable.
As this is a NOT a genuine product you will notice it does NOT features a Ford logo on the back of the key and has no part details in the section where the key blade folds into as would be normal on a genuine key. This flip key style is generic and the circuit board can have data written to it to suit many different vehicles. You may hav a key that looks identical to it and be using that key with a different make and model as the data written tot he circuit board inside it is different.
The detail you are looking for on the back of your original remote includes:
Visteon Model No. 41835
You will see some other info printed in this area too but the detail above is what you will need to identify on your key. If you are unsure, simply send us a photo of the details in that part of your key and the VIN and we will confirm if this key suits your vehicle.
If you would like to book an appointment to have us cut and code the key for your vehicle just give us a call on (08) 6110 2693. We will generally need the vehicle for around 40 minutes to compete the job.
This key is supplied with a CR2032 battery already fitted and you can order spare batteries from the Compatible items tab lower down this page.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
| Frequency | 433.92 MHz |
| No. of Buttons | 2 BUTTONS |
| Shell Colour | CHROME & BLACK |
| Button Colour | BLACK |
| Remote Programming Method | MANUAL PROCESS |
| Transponder Programming Method | DIAGNOSTIC TOOLS REQUIRED |
| Dimensions in mm (L x W x D) | 71 x 36 x 20 |
| Battery Type | CR2032 - 3V |
| LED Color | RED |
This is a genuine factory part and can be used with Ford Ranger models between 2006 and 2011. Remote has Visteon Model No. 41835 on back. There are also aftermarket replacement remotes or even flip-keys where you can combine your remote and your key into one. See Compatible Items section below. A2 - P4B
CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...
This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE PRESENT AT OUR WORKSHOP - THIS PRICE ONLY APPLIES TO KEYS WE HAVE SUPPLIED
The B11 2 button flip key uses a Standard Transmitter and is compatible where the original remote or flip key uses a Standard Transmitter. If your original remote has a Crystal Transmitter you need the B-Series Crystal flip-keys. Using our in-house tools we can generate a new remote and clone your transponder allowing you to get a flip-key for a fraction...
This carbon transponder chip can be known as an ID8C TEMIC (when configured for Ford/Mazda). It is mostly referred to as a ID8C and can be used in a large number of different models of car. ID8C
Mazda compatible aftermarket flip key blade that fits our range of KD & XH flip keys and suitable for a huge number of Mazda models with matching Silca MAZ24R or JMA MAZ-11D key blade profile. KD1
No customer reviews for the moment.





