Sanji Intellica TX HYDX V3 433MHZ 2 grey button oval black car alarm remote

SANJI-HYDX (A5 - BACK)

New product

This oval 2 grey button remote from Sanji Intellica is becoming more difficult to get hold of. It can replace the other models including the popular TX SAN-CH V4.

There is an identical looking remote on 303.92mhz so best to check the board in the remote.

The frequency will be printed on the small metal transmitter in the middle of the board.

A5 - BACK

More details

Shipping Rates

This product has been temporarily removed from sale as direct result of the Consumer Goods (Products Containing Button/Coin Batteries) Safety Standard 2020 which becomes enforceable on 22nd June 2022 and carries fines of up to $1million. 

All products that contain a button cell or coin type battery must be safety tested to confirm they comply with these new regulations. All button cell batteries must be in a new type of packaging with new labels. 

We are working with all of our suppliers to confirm this compliance before we make the product available for sale again. 

We should have had 18 months to get this compliance but sadly the ACCC did not inform our suppliers or us or pretty much any other industry and we only found out about this new law 4 weeks ago.

Please feel free to email us with the details of what you were looking for and we will give you an update on when we expect it to be back available for sale.

This remote was very popular but there are not many of these available to sell anymore. It can replace the other remotes shown in the photos attached. 

To ensure the remote you have is the same as this one here and works on 433.92mhz you will need to remove the screws from the back of the remote and open it up. On the circuit board you will see the transmitter as shown in the photo. This should have 433 engraved on it, this indicated the operating frequency. If is starts with 303 it is not compatible as this is the old obsolete version.

Many of our remotes fobs such as this one here can be programmed to your vehicle yourself and we are happy to provide instruction on how to do this. The instructions will usually have pictures of which buttons to press in the car or very specific instructions on what you need. In almost all cases this takes less than 5 minutes to complete and some remotes can take as little as 2 minutes to program to your car.

If you have any issues during programming please call us and we will talk you through it. If you are not confident about programming the remote yourself just select the Click & Collect delivery option and then bring your car to our shop during business hours and we will program the remote for you.

If you are not certain that the remote you have is compatible please feel free to email us a photo of the remote and some details of your vehicle such as Year – Make - Model and we will be more than happy to help you work out which remote to purchase. Take a look at the Compatible Items tab below to see what other options there are for replacing this remote. Where you wish to integrate your remote and key into a flip key this will need to be done at our shop as we do not have a mobile key cutting service.

To ensure you get the most appropriate instructions please tell us the model of vehicle you are going to use the remote with in the comment section of the checkout.

We offer a 12 Month Warranty on all genuine remotes in line with the manufacturer conditions, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.

Frequency 433.92 MHz
No. of Buttons 2 BUTTONS
Shell Colour BLACK
Button Colour GREY
Remote Programming Method IN CAR PROGRAMMABLE
Encryption Type ROLLING CODE
Dimensions in mm (L x W x D) 70 x 32 x 11
Battery Type 2 X CR1220 3V
LED Color RED
  • $69.95 In Stock

    This oval 2 black button remote from Sanji Intellica is the latest release and replaced the older grey button RKS03 (TXSAN-CH-V3), AT120 (TXSAN-CH-V3) and TX HYDX V3. This remote has the part number TX SAN-CH V4 on the circuit board. The frequency (433 MHz) will be printed on the small metal transmitter in the middle of the board. This remote uses a...

    $69.95
    In Stock

No customer reviews for the moment.

Write a review

Sanji Intellica TX HYDX V3 433MHZ 2 grey button oval black car alarm remote

Sanji Intellica TX HYDX V3 433MHZ 2 grey button oval black car alarm remote

This oval 2 grey button remote from Sanji Intellica is becoming more difficult to get hold of. It can replace the other models including the popular TX SAN-CH V4.

There is an identical looking remote on 303.92mhz so best to check the board in the remote.

The frequency will be printed on the small metal transmitter in the middle of the board.

A5 - BACK

Compatible Items

Follow us on Facebook

Brands