Mazda 626 GF series & 323 BJ2, Visteon 41601 2 button genuine remote control

RMZ14 (A12 - P4B)

New product

This is a genuine factory part and can be used with Mazda 626 models made between 1999-2002 or 323 BJ2 models 2000 - 2003. Remote has Visteon Model No. 41601 on back.

There are also aftermarket replacement remotes or even flip-keys where you can combine your remote and your key into one. See Compatible Items section below.

A12 - P4B

More details

$334.95 GST incl.

Shipping Rates

This product has been temporarily removed from sale as direct result of the Consumer Goods (Products Containing Button/Coin Batteries) Safety Standard 2020 which becomes enforceable on 22nd June 2022 and carries fines of up to $1million. 

All products that contain a button cell or coin type battery must be safety tested to confirm they comply with these new regulations. All button cell batteries must be in a new type of packaging with new labels. 

We are working with all of our suppliers to confirm this compliance before we make the product available for sale again. 

We should have had 18 months to get this compliance but sadly the ACCC did not inform our suppliers or us or pretty much any other industry and we only found out about this new law 4 weeks ago.

Please feel free to email us with the details of what you were looking for and we will give you an update on when we expect it to be back available for sale.

This particular remote shell is used for quite a few different remote controls by both Ford and Mazda. You must check the back of your remote to see that the model number matches this one, as otherwise it will not work with your vehicle. Your remote must have the following on the back of the case "Visteon Model No. 41601". If it has any other number it is not compatible with this one.

Many of our separate remotes fobs such as this one here can be programmed to your vehicle yourself and we provide instruction on how to do this with all such remotes. The instructions will usually have pictures of which buttons to press in the car or very specific instructions on what you need. In almost all cases this takes less than 5 minutes to complete and some such as the Ford remotes can take as little as 2 minutes to program to your car.

If you have any issues during programming please call us and we will talk you through it. If you are not confident about programming the remote yourself just select the Click & Collect delivery option and then bring your car to our shop during business hours and we will program the remote for you. 

If you are not certain that the remote you have is compatible please feel free to email us a photo of the remote and some details of your vehicle such as Year – Make - Model and we will be more than happy to help you work out which remote to purchase.

Take a look at the Compatible Items tab below to see what other options there are for replacing this remote. Where you wish to integrate your remote and key into a flip key this will need to be done at our shop as we do not have a mobile key cutting service.

To ensure you get the most appropriate instructions please tell us the model of vehicle you are going to use the remote with in the comment section of the checkout.

We offer a 12 Month Warranty on all genuine remotes in line with the manufacturer conditions, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.

KD REF: MAZDA / 41601 Australia

Frequency 433.92 MHz
No. of Buttons 2 BUTTONS
Shell Colour BLACK
Button Colour 1 GREY & 1 BLACK
Remote Programming Method IN CAR PROGRAMMABLE
Encryption Type ROLLING CODE
Dimensions in mm (L x W x D) 60 x 31 x 11
Battery Type CR2025 - 3V
LED Color NO LED
  • $195.00 In Stock

    The B10 2 button flip key uses a Crystal Transmitter and so is only compatible where the original remote or flip key also uses a Crystal Transmitter.  Using our in-house tools we can generate a new remote and program your transponder allowing you to get a flip-key for a fraction of the cost of a genuine dealer key. A6

    $195.00
    In Stock
  • $95.00 In Stock

    The B01-2-BSC is a 2 button flipkey featuring a standard type transmitter and is compatible where the original remote or flip key uses a standard transmitter. Using our in-house tools we can generate a new remote to suit your vehicle allowing you to get a flip-key for a fraction of the cost of a genuine dealer key.

    $95.00
    In Stock
  • $95.00 In Stock

    The B11 2 button flipkey uses a Standard Transmitter and is compatible where the original remote or flip key uses a Standard Transmitter. If your original remote has a Crystal Transmitter you need the B-Series Crystal flip-keys. Using our in-house tools we can generate a new remote and clone your transponder allowing you to get a flip-key for a fraction...

    $95.00
    In Stock
  • $79.95 In Stock

    The B09-3 3 button remote uses a Standard Transmitter and is compatible where the original remote uses a Standard Transmitter. If your original remote has a Crystal Transmitter you need the B-Series Crystal flip-key range. Using our in-house tools we can generate a new remote and program it for a fraction of the cost of a genuine dealer remote. KD7

    $79.95
    In Stock
  • The B17 3 button remote uses a Standard Transmitter and is compatible where the original remote uses a Standard Transmitter. If your original remote has a Crystal Transmitter you need the B-Series Crystal flip-key range. Using our in-house tools we can generate a new remote and program it for a fraction of the cost of a genuine dealer remote. DRW

  • $29.95 In Stock

    Here we have an aftermarket replacement 2 button black plastic shell and rubber button pad used in the Visteon Model remote controls used with a number of Mazda vehicles. This remote has 1 black UNLOCK button and 1 grey LOCK button. KIT INCLUDES PLASTIC CASE OR SHELL & BUTTON PAD ONLY - NO ELECTRONICS INCLUDED. S45

    $29.95
    In Stock

No customer reviews for the moment.

Write a review

Mazda 626 GF series & 323 BJ2, Visteon 41601 2 button genuine remote control

Mazda 626 GF series & 323 BJ2, Visteon 41601 2 button genuine remote control

This is a genuine factory part and can be used with Mazda 626 models made between 1999-2002 or 323 BJ2 models 2000 - 2003. Remote has Visteon Model No. 41601 on back.

There are also aftermarket replacement remotes or even flip-keys where you can combine your remote and your key into one. See Compatible Items section below.

A12 - P4B

Compatible Items

Follow us on Facebook

Brands