Elsema Penta PCR43302R 2 channel receiver for Penta remotes

This Elsema PCR43302R receiver is compatible with Elsema PentaFOB and PentaCODEremotes.

It has TWO relay outputs which can be switched “on” and “off ” independently. The relays are capable of switching loads of up to 10 Amps at 240 Volts AC.

The receiver is small and can be easily installed into your existing automatic gate opener or garage door controls. Other applications include light control, security shutters or anywhere else you need a wireless signal to transmit a contact closure.

It is important to note that this receiver board is not suited to locations which are exposed to the elements and it does not include any enclosure. If you need a receiver which includes an enclosure you may wish to look at the Elsema PCR43302RE.

The PentaCODE® dual coding system gives the installer the option to use the classic 12-way dip switch coding with Pentacode remotes or one of over 17 billion encrypted codes and the PentaFob remotes.

With the 12-way dip switch, just match the Pentacode keyring remotes and the receiver's dip switch and it's coded.

With the encrypted code you switch all the 12-way dip switches OFF and the remote and receiver automatically goes into the encrypted coding. Please see coding instructions for encrypted coding procedure pf thr PentaFob type remotes.

The receiver is covered by a 2 year manufacturers warranty.

SPECIFICATIONS:

Supply Voltage: 11.0 – 28 V AC/DC. Can use Elsema DC or AC power supply, 12PP1000 or 24PP.
Current Consumption: 21 mA standby
Operating frequency: 433.100 to 434.700 MHz
Sensitivity: Better than 0.316µV (-117dBm)
Relay Output: Two change over relay output, rated at 10 Amps /240V AC
Antenna: Elsema ANT 433MHz series
Dimensions: 88 x 52 x 25 mm
Useable Transmitters: All Elsema type PCK433 & FOB433 series
Ideal for Industrial Automation, eg Crane Control, winches, wireless cement truck operation.