Mazda 323 BJ 1998-2003 2 button Visteon 41601 fip key

B11-2-50 (DIAG-P4C)

New product

This Mazda compatible 2 button flip key suits Mazda 323 BJ series 2 models from 1998 to 2003 where the original remote is marked Visteon 41601 as shown in the attched images.

CUTTING & PROGRAMMING NOT INCLUDED IN THE PRICE

DIAG - P4C

More details

$105.00 GST incl.

Instead of $129.95

Shipping Rates

Aftermarket Mazda compatible 2 button remote flip-key can be used with Mazda 323 BJ series 2 models from 1998 to 2003. This remote transmits on 434 MHz and the key uses an ID8C transponder chip inside it.

The transponser chip inside this key can be cloned or added using a fixed pincode calculated from codes on the immobiliser box by a licensed locksmith. We offer this service at our East Victoria Park workshop or you can have it done locally to you.

The remote part of the key is programmed using a manual process also referred to as an onboard process or in car programmable. 

Important to check that your remote is marked as shown in the images with the following data:

Visteon Model No. 41601

There may also be other information printed on the back of the remote but the data shown above is what will confirm that this aftermarket remote is compatible with your original key. 

As this is a NOT a genuine Mazda product you will notice it does NOT features a Mazda logo on the back of the key and has no part details in the section where the key blade folds into as would be normal on a genuine key.

This flip key style is generic and the circuit board can have data written to it to suit many different vehicles. You may have a key that looks identical to it and be using that key with a different make and model as the data written to the circuit board inside it is different.  

If you are unsure, simply send us the VIN for your vehicle and we will confirm if this key suits your vehicle. We do stock some genuine Mazda flip keys if you would prefer a genuine key, however we reccomend this aftermarket key as the design is musch stronger than the genuine Mazda keys.

We can also make you a non-remote transponder key if you simply need a cheaper option without a remote. You will see these items listed under Compatible Items below.

If you would like to book an appointment to have us cut and code the key for your vehicle just give us a call on (08) 6110 2693. We will generally need the vehicle for around 45 minutes to compete the job.

This key is supplied with a CR2032 battery already fitted and you can order spare batteries from the Compatible items tab lower down this page.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Frequency 433.92 MHz
No. of Buttons 2 BUTTONS
Shell Colour CHROME & BLACK
Button Colour BLACK
Remote Programming Method MANUAL PROCESS
Transponder Programming Method DIAGNOSTIC TOOLS REQUIRED
Dimensions in mm (L x W x D) 71 x 36 x 20
Battery Type CR2032 - 3V
LED Color RED
  • $334.95

    This is a genuine factory part and can be used with Mazda 626 models made between 1999-2002 or 323 BJ2 models 2000 - 2003. Remote has Visteon Model No. 41601 on back. There are also aftermarket replacement remotes or even flip-keys where you can combine your remote and your key into one. See Compatible Items section below. A12 - P4B

    $334.95
  • $95.00

    This would have to be the most widely used Mazda key profile as you will see from the list of cars it was used with below. Cutting the key & cloning of the transponder chip, is included in the price. Service available at our East Victoria Park workshop only. VEHICLE MUST BE PRESENT AT TIME OF CUTTING KEY. MAZ-11D.P2

    $95.00
  • $8.95 In Stock

    CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...

    $8.95
    In Stock
  • $90.00 In Stock

    This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE PRESENT AT OUR WORKSHOP - THIS PRICE ONLY APPLIES TO KEYS WE HAVE SUPPLIED

    $90.00
    In Stock
  • $95.00 In Stock
    1 x

    The B11 2 button flip key uses a Standard Transmitter and is compatible where the original remote or flip key uses a Standard Transmitter. If your original remote has a Crystal Transmitter you need the B-Series Crystal flip-keys. Using our in-house tools we can generate a new remote and clone your transponder allowing you to get a flip-key for a fraction...

    $95.00
    In Stock
  • $25.00 In Stock
    1 x

    This carbon transponder chip can be known as an ID8C TEMIC (when configured for Ford/Mazda). It is mostly referred to as a ID8C and can be used in a large number of different models of car. ID8C

    $25.00
    In Stock
  • $9.95 In Stock
    1 x

    Mazda compatible aftermarket flip key blade that fits our range of KD & XH flip keys and suitable for a huge number of Mazda models with matching Silca MAZ24R or JMA MAZ-11D key blade profile. KD1

    $9.95
    In Stock

No customer reviews for the moment.

Write a review

Mazda 323 BJ 1998-2003 2 button Visteon 41601 fip key

Mazda 323 BJ 1998-2003 2 button Visteon 41601 fip key

This Mazda compatible 2 button flip key suits Mazda 323 BJ series 2 models from 1998 to 2003 where the original remote is marked Visteon 41601 as shown in the attched images.

CUTTING & PROGRAMMING NOT INCLUDED IN THE PRICE

DIAG - P4C

Compatible Items

Follow us on Facebook

Brands